KIT - Institut für Mechanische Verfahrenstechnik und Mechanik - Forschung (GPS) - Publikationen

Begutachtete Veröffentlichungen 2024 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Drainage behavior and entrainment mechanisms in oil mist separation applications—A review	R. Mandic, J. Meyer, A. Dittler	Separation and Purification Technology, 2024, 130274, https://doi.org/10.1016/j.seppur.2024.130274 (open access)
Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors	F. Reinke, J. Meyer, A. Dittler	Journal of Aerosol Science, 2024, 106476, https://doi.org/10.1016/j.jaerosci.2024.106476 (open acess)
Discrete element method simulation of particulate material fracture behavior on a stretchable single filter fiber with additional gas flow	E. Asylbekov, L. Poggemann, A. Dittler, H. Nirschl	Powders, 2024, 3, 367-391, https://doi.org/10.3390/powders3030021 (open access)
Detachment of particulate structures from a fiber array due to stretching and simultaneous gas flow	L. Poggemann, P. Längle, J. Meyer, A. Dittler	Separation and Purification Technology, 2024, 127887, https://doi.org/10.1016/j.seppur.2024.127887 (open access)
Experimental and numerical investigation of droplet–fiber interaction on mechanically excited fiber	A. Schwarzwälder, F. Freese, J. Meyer, K, Loganathan, H. Tietze, A. Dittler, U. Janoske	Physics of Fluids 2024, 36, 032006, https://doi.org/10.1063/5.0188784
Exploratory measurements of ambient air quality in a residential area applying a diffusion charge based UFP monitor	P. Bächler, F. Weis, S. Kohler, A. Dittler	Gefahrstoffe, 2024, 84, 01-02, 15-22, https://doi.org/10.37544/0949-8036-2024-01-02-17https://doi.org/10.37544/0949-8036-2024-01-02-17
Measurement of transient nanoparticle emissions of a municipal biomass incineration plant equipped with pulse-jet cleaned filters	P. Bächler, J. Meyer, R. Ligotski, P. Krug, A. Dittler	Process Safety and Environmental Protection, 2024, https://doi.org/10.1016/j.psep.2024.02.013 (open access)
Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 2: Modeling	P. Bächler, J. Meyer, A. Dittler	Chemical Engineering & Technology, 2024, 47, https://doi.org/10.1002/ceat.202300409 (open access)
Experimental analysis of water-droplet-fiber interaction on a mechanically excited hydrophobic fiber	A. Schwarzwälder, J. Meyer, A. Dittler	Physics of Fluids, 2024, 36, 012010, https://doi.org/10.1063/5.0178183

Begutachtete Veröffentlichungen 2023 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Influence of deposited liquid structures on the separation efficiency of thin oleophilic fiber layers of mist filters	C. Straube, R. Mandic, J. Meyer, A. Dittler	Separation and Purification Technology, 2023, 125977, https://doi.org/10.1016/j.seppur.2023.125977
Experimental investigations of the detachment of different particle structures from a magnetizable fiber in the gas phase	J. Szabadi-Fuchs, J. Meyer, A. Dittler	Separations, 2023, 10, 579, https://doi.org/10.3390/separations10120579 (open access)
Additive manufacturing in gas cleaning applications	F. Reinke, C. Straube, J. Meyer, A. Dittler	In: Klahn, C., Meboldt, M., Ferchow, J. (eds) Industrializing Additive Manufacturing. AMPA 2023. Springer Tracts in Additive Manufacturing. Springer, Cham. https://doi.org/10.1007/978-3-031-42983-5_26
Morphology of particulate structures on a fiber array before and at clogging point of an aerosol filtration process	L. Poggemann, B. King, J. Meyer, A. Dittler	Separations, 2023, 10, 462, https://doi.org/10.3390/separations10090462 (open access)
In situ tracking of break-up, resuspension, and transport of reactive particle structures in a single wall-flow filter channel	J.R.D. Thieringer, H. Werling, J. Meyer, A. Dittler	Emission Control Science and Technology, 2023, https://doi.org/10.1007/s40825-023-00228-x (open access)
Simulation of dynamic rearrangement events in wall-flow filters applying Lattice Boltzmann methods	N. Hafen, J.E. Marquardt, A. Dittler, M.J. Krause	Fluids 2023, 8, 213. https://doi.org/10.3390/fluids8070213 (open access)
Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 1: Experimental parameter study	P. Bächler, J. Meyer, A. Dittler	Chemical Engineering & Technology, 2023, 46, https://doi.org/10.1002/ceat.202300080 (open access)
In situ characterization of particle structures generated at different flow velocities on a single fiber in the gas phase	J. Szabadi, J. Meyer, A. Dittler	Journal of Aerosol Science, 2023, 106197, https://doi.org/10.1016/j.jaerosci.2023.106197
Experimental analysis of droplet coalescence and transport mechanisms on a single vertical fiber	A. Schwarzwälder, J. Meyer, A. Dittler	Experiments in Fluids, 2023, 64, 103, https://doi.org/10.1007/s00348-023-03628-5 (open access)
A newly developed dilution system for optical particle size and concentration measurements in oil-injected scres compressors	J.C. Deichmann, C. Straube, J. Eisengräber-Pabst, T. Grein, J. Meyer, A. Dittler	Aerosol Science and Technology, 2023, https://doi.org/10.1080/02786826.2023.2209623
Particulate matter detachment from a magnetizable single fiber applying magnetic forces in ambient air	J. Szabadi, J. Meyer, A. Dittler	Separations, 2023, 10, 297, https://doi.org/10.3390/separations10050297 (open access)
Influence of the filtration velocity on the local oil distribution of oleophilic coalescence filter media	C. Straube, J. Meyer, A. Dittler	Separations 2023, 10, 254, https://doi.org/10.3390/separations10040254 (open access)
Experimental investigation on the change of pull-off force between bulk particulate material and an elastic polymeric filter fiber	L. Poggemann, R. Thelen, J. Meyer, A. Dittler	Journal of Collid and Interface Science, 2023, 641, 903-915, https://doi.org/10.1016/j.jcis.2023.03.051
Simulation of particulate matter structure detachment from surfaces of wall-flow filters for elevated velocities applying lattice Boltzmann methods	N. Hafen, J.E. Marquardt, A. Dittler, M. Krause	Fluids 2023, 8, 99. https://doi.org/10.3390/fluids8030099 (open access)
Numerical investigation of detachment and transport of particulate sturctures in wall-flow filters using lattice Boltzmann methods	N. Hafen, J.R.D. Thieringer, J. Meyer, M.J. Krause, A. Dittler	Journal of Fluid Mechanics, 2023, 956, A30, https://www.doi.org/10.1017/jfm.2023.35, (open access)
Investigation of the local oil distribution on oleophilic mist filters applying X-ray micro-computed tomography	C. Straube, J. Meyer, A. Dittler	Separation and Purification Technology, 2023, 311,123279, https://doi.org/10.1016/j.seppur.2023.123279
Spatially resolved online leak detection in a baghouse filter applying low-cost PM-sensors	P. Bächler, J. Meyer, A. Dittler	Chemie Ingenieur Technik, 2023, 95, No. 1-2, https://doi.org/10.1002/cite.202200116 (open access)

Begutachtete Veröffentlichungen 2022 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Generation, characterization and comparison of human exhaled and technical aerosols for the evaluation of different air purifying technologies against infectious aerosols	T. Penner, S. Berger, J. Niessner, A. Dittler	Journal of Occupational and Environmental Hygiene, 2022, https://doi.org/10.1080/15459624.2022.2125520
Penetration of water-soluble material through gas-cleaning filters	A.D. Schwarz, J. Meyer, A. Dittler	Membranes 2022, 12, 776, https://doi.org/10.3390/membranes12080776 (open access)
Investigation of the rearrangement of reactive-inert particulate structures in a single channel of a wall-flow filter	J.R.D. Thieringer, N. Hafen, J. Meyer, M.J. Krause, A. Dittler	Separations 2022, 9, 195, https://doi.org/10.3390/separations9080195 (open access)
Experimental detection of particle structures detachment from a strectchable single fiber during multiple consecutive stretching cycles	L. Poggemann, J. Meyer, A. Dittler	Separations 2022, 9, 168, https://doi.org/10.3390/separations9070168 (open access)
Impact of seams on the operating behavior of surface filters regarding particle emissions	C.R. de Lacerda, P. Bächler, A.D. Schwarz, R. Sartim, M.L. Aguiar, A. Dittler	Chemical Engineering & Technology, 2022, 45, No. 7, 1354-1362, https://doi.org/10.1002/ceat.202200132
Generation of ash particles from different lube oil mists	J.R.D. Thieringer, A. K. Watzek, J. Meyer, A. Dittler	Aerosol Science & Technology, 2022, Vol, 56, No. 8, 744-756, https://doi.org/10.1080/02786826.2022.2073192 (open access)
Fast adhesion calculation for collisions between arbitrarily shaped particles and a wall	K.O. Braschke, J. Zoller, F. Freese, A. Dittler, U. Janoske	Powder Technology, 2022, https://doi.org/10.1016/j.powtec.2022.117494
Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration – Teil 2: Experimentelle Untersuchungen	A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt	Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100213 (open access)
Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration - Teil 1: Theoretische Betrachtungen	A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt	Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100158 (open access)
Influence of 3D printed downstream support structures on pressure drop and entrainment of oleophilic and oleophobic oil mist filters	C. Straube, G. Yang, D. Voll, J. Meyer, P. Théato, A. Dittler	Separation and Purification Technology, 2022, 290, 120802, https://doi.org/10.1016/j.seppur.2022.120802
Impact of residential real-world wood stove operation on air quality concerning PM2.5 immission	J.R.D. Thieringer, J. Szabadi, J. Meyer, A. Dittler	Processes 2022, 10, 545, https://doi.org/10.3390/pr10030545 (open access)
Simulation of particulate matter structure detachment from surfaces of wall-flow filters applying lattice Boltzmann methods	N. Hafen, A. Dittler, M.J. Krause	Computers & Fluids, 2022, https://doi.org/10.1016/j.compfluid.2022.105381
A novel apparatus for simultaneous Laser-light-sheet optical particle counting and video recording in the same measurement chamber at high temperature	J. Zoller, A. Zargaran, K. Braschke, J. Meyer, Uwe Janoske, A. Dittler	Sensors, 2022, 22, 1363, https://doi.org/10.3390/s22041363 (open access)
Process integrated monitoring of spatially resolved particle emissions of a baghouse filter using a network of low-cost PM-sensors	P. Bächler, V. Löschner, J. Meyer, A. Dittler	Process Safety and Environmental Protection, 2022, 160, 411-423, https://doi.org/10.1016/j.psep.2022.02.005
Applied geometry optimization of an innovative 3D-printed wet-scrubber nozzle with a Lattice Boltzmann method	F. Reinke, N. Hafen, M. Haussmann, M. Novosel, M.J. Krause, A. Dittler	Chemie Ingenieur Technik, 2022, 94, No. 3, 348-355, https://doi.org/10.1002/cite.202100151 (open access)
Measurement of transient nanoparticle emissions of pulse-jet cleaned filters applying an engine exhaust particle sizer	P. Bächler, J. Meyer, A. Dittler	Aerosol Science and Technology, 2022, Vol. 56, No. 4, 394-402, https://doi.org/10.1080/02786826.2022.2027335
Simultaneous temporal, spatial and size-resolved measurements of aerosol particles in closed indoor environments applying mobile filters in various use-cases	J. Szabadi, J. Meyer, M. Lehmann, A. Dittler	Journal of Aerosol Science, 2022, 160, 105906, https://doi.org/10.1016/j.jaerosci.2021.105906
Humidity considerations in filter testing based on analysis of filters from gas turbine applications	A.D. Schwarz, J. Dutzi, P. Weber, C. Sattler, K. Schulz, T. Caesar, J. Meyer, A. Dittler	Chemical Engineering & Technology, 2022, https://doi.org/10.1002/ceat.202100344 (open access)

Begutachtete Veröffentlichungen 2021 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Identification of deposited oil structures on thin porous oil mist filter media applying μ-CT imaging technique	C. Straube, J. Meyer, A. Dittler	Separations 2021, 8, 193, https://doi.org/10.3390/separations8100193 (open access)
On aerosol formation by condensation of oil vapor in the crankcase of combustion engines	N. Nowak, T. Sinn, K. Scheiber, C. Straube, J. Pfeil, J. Meyer, T. Koch, G. Kasper, A. Dittler	Aerosol Science and Technology, https://doi.org/10.1080/02786826.2021.1976720
Analytical and numerical calculation of the detachment of particle structures from fibres	K. Braschke, J. Zoller, A. Zargaran, A. Dittler, U. Janoske	Aerosol Science and Technology, 2021, https://doi.org/10.1080/02786826.2021.1972085
A critical note on filtering-face-piece filtration efficiency determination applying EN 149	J. Zoller, J. Meyer, A. Dittler	Journal of Aerosol Science, 2021, 158, 105830, https://doi.org/10.1016/j.jaerosci.2021.105830
Impact of ambient air filters on PM concentration levels at an urban traffic hotspot (Stuttgart, Am Neckartor)	P. Bächler, T.K. Müller, T. Warth, T. Yildiz, A. Dittler	Atmospheric Pollution Research, 2021, 12, 101059, https://doi.org/10.1016/j.apr.2021.101059 (open access)
A novel method to investigate detachment of particulate structures from an elastic single fiber at low gas flow velocities	L. Poggemann, J. Meyer, A. Dittler	Journal of Aerosol Science, 2021, 156, 105785, https://doi.org/10.1016/j.jaerosci.2021.105785 (open access)
Stellungnahme des "Expertenkreises Aerosole": Aerosole und SARS-CoV-2 - Entstehung, Infektiosität, Ausbreitung und Minderung luftgetragener virenhaltiger Teilchen in der Atemluft	S. Brockmann, A. Dittler, G. Grün, M. Haibel, T. Iftner, H.-G. Kräusslich, B. Mizaikoff, J. Niessner, B. Richter, C. Spahn, K. Stergiaropoulos, H. von Braun	Das Gesundheitswesen, 2021, 83, 231-234, DOI: 10.1055/a-1363-0972
Oleophilic and oleophobic media combinations - Influence on oil mist filter operating performance	T. Penner, J. Meyer, A. Dittler	Separation and Purification Technology 2021, 261, 118255, https://doi.org/10.1016/j.seppur.2020.118255
Interaction of water droplets with soluble filter cakes in gas cleaning applications	A.D. Schwarz, J. Meyer, A. Dittler	Separation and Purification Technology, 2021, https://doi.org/10.1016/j.seppur.2020.118128
Characterization of mesoscale inhomogeneity in nonwovens and its relevance in the filtration of fine mists	T. Penner, J. Meyer, A. Dittler	Journal of Aerosol Science, January 2021, volume 151, 105674, https://doi.org/10.1016/j.jaerosci.2020.105674 (open access)

Begutachtete Veröffentlichungen 2020 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Morphology of particulate deposits formed on a single filter fibre by exposure to mixed aerosol flow	J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler	Journal of Aerosol Science, 2020, https://doi.org/10.1016/j.jaerosci.2020.105718
Experimental investigation of reactive-inert particulate matter detachment from metal fibres at low flow velocities and different gas temperatures	J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler	Aerosol Science and Engineering, 2020, https://doi.org/10.1007/s41810-020-00081-3 (open access)
Simultaneous measurement of spatially resolved particle emissions in a pilot plant scale baghouse filter applying distributed low-cost particulate matter sensors	P. Bächler, J. Szabadi, J. Meyer, A. Dittler	Journal of Aerosol Science, 2020, 150, 105644, https://doi.org/10.1016/j.jaerosci.2020.105644 (open access)
Sampling and conditioning of engine blow-by aerosols for representative measurements by optical particle counter	N. Nowak, K. Scheiber, J. Pfeil, J. Meyer, A. Dittler, T. Koch , G. Kasper	Journal of Aerosol Science, October 2020, Volume 148, 105612, https://doi.org/10.1016/j.jaerosci.2020.105612
Relevance of downstream support structure design for oleophilic and oleophobic oil mist filter operating performance	T. Penner, J. Meyer, A. Dittler	Separation and Purification Technology, 2020, 248, 117074, https://doi.org/10.1016/j.seppur.2020.117074
Loss of nanoparticles in a particulate matter sampling system applied for environmental ultrafine particle measurements	J. Zoller, J. Gulden, J. Meyer, A. Dittler	Aerosol Science and Engineering, 2020, 4, 50-63, https://doi.org/10.1007/s41810-020-00054-6 (open access)
Impact of water droplet and humidity interaction with soluble particles on the operational performance of surface filters in gas cleaning applications	A.D. Schwarz, L. König, J. Meyer, A. Dittler	Journal of Aerosol Science, 2020, 142, 105523, https://doi.org/10.1016/j.jaerosci.2020.105523 (open access)

Begutachtete Veröffentlichungen 2019 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Characterization of the emission behavior of pulse-jet cleaned filters using a low-cost particulate matter sensor	P. Bächler, J. Meyer, A. Dittler	Gefahrstoffe Reinhaltung der Luft 79, 2019, 79, Nr. 11-12, 443-450
Comparison of different particle measurement techniques at a heavy-duty diesel engine test bed	T. Michler, J Dörnhöfer, D. Erforth, A. Heinz, K. Scheiber, P. Weber, N. Nowak, H. Kubach, J. Meyer, T. Koch, A. Dittler	SAE Technical Paper 2019-24-0158, 2019, doi: 10.4271/2019-24-0158
Einfluss ausgewählter Medienstrukturparameter auf das Betriebsverhalten von Öllnebelfiltern	T. Penner, W. Heikamp, J. Meyer, A. Dittler	Chemie Ingenieur Technik, 2019, 91, No. 11, 1615-1622, DOI: 10.1002/cite.201900018
Impact of operating conditions on the evolution of droplet penetration in oil mist filters	T. Penner, J. Meyer, G. Kasper, A. Dittler	Separation and Purification Technology, 2019, 211, 697-703, https://doi.org/10.1016/j.seppur.2018.10.037
Mist filters: How steady is their "steady state"?	H.E, Kolb, G. Kasper	Chemical Engineering Science, 2019, 204, 118-127, https://doi.org/10.1016/j.ces.2019.03.072
On the functioning of coalescence filters with a drainage layer - A comment on several papers by Chang et al.	H.E. Kolb, G. Kasper	Separation and Purification Technology, 2019, 225, 54-59, https://doi.org/10.1016/j.seppur.2019.05.026

Begutachtete Veröffentlichungen 2018 - Gas-Partikel-Systeme
Titel	Autor	Quelle
On the Activity Enhancing Role of Iron Oxide for Noble Metal Oxidation Catalysts: A CVD-Based Study with Differently Structured Combinations of Pt and FeOx Coatings on Al2O3	L. Pasin, J. Meyer, D. Chati Seraphim, E. Eiche, G. Kasper	Coatings, 2018, 8, 217; DOI: 10.3390/coatings8060217
Efficient aerosol assisted delivery of low-volatility precursor for CVD applications	L. Pasin, J. Meyer, E. Eiche, F. Weis, G. Kasper	Journal of Aerosol Science, 2018, 126, 180-190, https://doi.org/10.1016/j.jaerosci.2018.09.003
Opportunities for low-cost particulate matter sensors in filter emission measurements	A.D. Schwarz, J. Meyer, A. Dittler	Chemical Engineering & Technology, 2018, https://doi.org/10.1002/ceat.201800209
A mesoscale model for the relationship between efficiency and internal liquid distribution of droplet mist filters	H.E. Kolb, A.K. Watzek, V. Zaghini Francesconi, J. Meyer, A. Dittler, G. Kasper	Journal of Aerosol Science, 2018, 123, 219-230, https://doi.org/10.1016/j.jaerosci.2018.05.013
On the accuracy of capillary flow porometry for fibrous filter media	H.E. Kolb, R. Schmitt, A. Dittler, G. Kasper	Separation and Purification Technology, 2018, 199, 198-205, https://doi.org/10.1016/j.seppur.2018.01.024

Begutachtete Veröffentlichungen 2017 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Flow velocity dependence of the pressure drop of oil mist filters	H.E. Kolb, J. Meyer, G. Kasper	Chemical Engineering Science, 2017, 166, 107-114, https://dx.doi.org/10.1016/j.ces.2017.03.028
On the relationship of drop entrainment with bubble formation rates in oil mist filters	S. Wurster, J. Meyer, G. Kasper	Separation and Purification Technology, 2017, 179, 542-549 https://dx.doi.org/10.1016/j.seppur.2017.02.036

Begutachtete Veröffentlichungen 2016 - Gas-Partikel-Systeme
Titel	Autor	Quelle
A sustainable route for antibacterial nanofinishing of textiles	E. Hontañon, J. Meyer, M. Blanes, V. Cambra, X. Guo, M. Masuhr, A. Muntean, L. Santos, H. Nirschl, E. Kruis	International Journal of Theoretical and Applied Nanotechnologie, 2016, 4, DOI: 10.11159/ijtan.2016.003
Influence of filter operating parameters on fine dust emissions from pulse-cleaned filter bags	O. Kurtz, J. Meyer, G. Kasper	Chemical Engineering Technology, 2016, 39, No.3, 435-443

Begutachtete Veröffentlichungen 2015 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Influence of anion and cation on the vapor pressure of binary mixtures of water + ionic liquid and on the thermal stability of the ionic liquid	N. Merkel, C. Weber, M. Faust, K. Schaber	Fluid Phase Equilibria, 2015, 394, 29-37
Enhanced deposition by electrostatic field-assistance aggravating diesel exhaust aerosol toxicity for human lung cells	L.C. Stoehr, P. Madl, M.S.P. Boyles, R. Zauner, M. Wimmer, H. Wiegand, A. Andosch, G. Kasper, M. Pesch, U. Lütz-Meindl, M. Himly, A. Duschl	Environmental Science and Technology, 2015, 49, 8721-8730
Bubbling vs. blow-off - On the relevant mechanism(s) of drop entrainment from oil mist filter media	S. Wurster, J. Meyer, E.H. Kolb, G. Kasper	Separation and Purification Technology, 2015, 152, 70-79
An electrical conductivity based method of determining the particle deposition rate in air-liquid interface devices	H. Wiegand, J. Meyer, G. Kasper	Toxicology in Vitro, 2015, 29 (5), 1100-1106
Detachment of droplets from cylinders in flow using an experimental analogue	C.J. Hotz, R. Mead-Hunter, T. Becker, A.J.C. King, S. Wurster, G. Kasper, B.J. Mullins	Journal of Fluid Mechanics, 2015, 771, 327-340
Measurement of oil entrainment rates and drop size spectra from coalescence filter media	S. Wurster, D. Kampa, J. Meyer, T. Müller, B.J. Mullins, G. Kasper	Chemical Engineering Science, 2015, 132, 72-80
Quantification of interparticle forces by energy controlled fragmentation analysis	R. Wernet, A.G. Schunk, W. Baumann, H.-R. Paur, M. Seipenbusch	Journal of Aerosol Science, 2015, 84, 14-20
Size-dependent ROS production by palladium and nickel nanoparticles in cellular and acellular environments – An indication for the catalytic nature of their interactions	N. Neubauer, J. Palomaeki, P. Karisola, H. Alenius, G. Kasper	Nanotoxicology, 2915, DOI: 10.3109/17435390.2015.1019585
Film growth rates and activation energies for core-shell nanoparticles derived from a CVD based aerosol process	F. Weis, M. Seipenbusch, G. Kasper	Materials, 2015, 8, 966-976, DOI: 10.3390/ma8030966
Coating thickness measurements on gas-borne nanoparticles by combined mobility and aerodynamic spectrometry	F. Weis, M. Seipenbusch, G. Kasper	Journal of Nanoparticle Research, 2015, DOI: 10.1007/s11051-014-2824-1
Validation of a new phenomenological “jump-and-channel” model for the wet pressure drop of oil mist filters	D. Kampa, S. Wurster, J. Meyer, G. Kasper	Chemical Engineering Science, 2015, 122, 150-160
Detection of airborne carbon nanotubes based on the reactivity of the embeded catalyst	N. Neubauer, G. Kasper	Journal of Occupational and Environmental Hygiene, 2015, 12, 3, 182-188

Begutachtete Veröffentlichungen 2014 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Pressure drop and liquid transport through coalescence filter media used for oil mist filtration	D. Kampa, S. Wurster, J. Buzengeiger, J. Meyer, G. Kasper	International Journal of Multiphase Flow, 2014, 58, 313-324
Highly controlled structuring of Pt nanoparticles on TiO2 and on ZrO2 by a modified MOCVD process	M. Faust, M. Seipenbusch	Surface and Coatings Technology 2014, 259, 577-584
Defined polymer shells on nanoparticles via a continuous aerosol-based process	S. Sigmund, E. Akgün, J. Meyer, J. Hubbuch, M. Wörner, G. Kasper	Journal of Nanoparticle Research, 2014, DOI: 10.1007/s11051-014-2533-9
An aerosol-based process for electrostatic coating of particle surfaces with nanoparticles	S. Sigmund, M. Yu, J. Meyer, G. Kasper	Aerosol Science and Technology, 2014, 48, 142-149
Low Reynolds number drag and particle collision efficiency of a cylindrical fiber within a parallel array	T. Müller, J. Meyer, G. Kasper	Journal of Aerosol Science, 2014, 77, 50-66
Impact of an oil coating on particle deposition and dust holding capacity of fibrous filters	T.K. Müller, J. Meyer, E. Thébault, G. Kasper	Powder Technology, 2014, 253, 247-255

Begutachtete Veröffentlichungen 2013 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Synthesis of Pt/SiO2 catalyst nanoparticles from a continuous aerosol process using novel cyclo-octadienylplatinum precursors	M. Faust, M. Enders, K. Gao, L. Reichenbach, T. Muller, W. Gerlinger, B. Sachweh, G. Kasper, M. Bruns, S. Bräse, M. Seipenbusch	Chemical Vapor Deposition, 2013, 19, 274-283-10, DOI: 10.1002/cvde.201207038
Simultaneous SWAXS study of metallic and oxide nanostructured particles	X. Guo, A. Gutsche, M. Wagner, M. Seipenbusch, H. Nirschl	Journal of Nanoparticle Research, 2013, 15, 1559
Size dependence of the ratio of aerosol coagulation to deposition rates for indoor aerosols	M. Yu, A.J. Koivisto, K. Hämeri, M. Seipenbusch	Aerosol Science and Technology, 2013, 47, 427–434
Synthesis of nanostructured Pt/oxide catalyst particles by MOCVD process at ambient pressure	M. Faust, M. Enders, M. Bruns, S. Bräse, K. Gao, M. Seipenbusch	Surface and Coatings Technology, 2013, 230, 284-289
Synthesis of BI2O3/SIO2 core–shell nanoparticles by an atmospheric CVS/CVD process and their modification by hydrogen or electron-beam induced reduction	F. Weis, R. Schneider, M. Seipenbusch, G. Kasper	Surface and Coatings Technology, 2013, 230, 93-100
The relationship between pressure drop and liquid saturation in oil-mist filters - Prediting filter saturation using a capillary based model	R. Mead-Hunter, R.D. Braddock, D. Kampa, N. Merkel, G. Kasper, B.J. Mullins	Separation and Purification Technology, 2013, 104, 121-129
Computational Fluid Dynamics (CFD) simulation of liquid aerosol coalescing filters	R. Mead-Hunter, A.J.C. King, G. Kasper, B.J. Mullins	Journal of Aerosol Science, 2013, DOI: https://dx.doi.org/10.1016/j.jaerosci.2013.03.009
Functionality based detection of airborne engineered nanoparticles in quasi real time: A new type of detector and a new metric	N. Neubauer, M. Seipenbusch, G. Kasper	Annals of Occupational Hygiene, 2013, doi: 10.1093/annhyg/met007

Begutachtete Veröffentlichungen 2012 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Comment on‘‘Performance evaluation of 3 optical particle counters with an efficient multimodal calibration method’’ (Heim etal.,2008) - Performance of improved counter	B.J. Mullins, D. Kampa, G. Kasper	Journal of Aerosol Science, 2012, 49, 48-50
A fast and accurate method of using electrical mobility scans for the direct measurement of aerosol charge distributions	M. Wild, J. Meyer, G. Kasper	Journal of Aerosol Science, 2012, 52 (Oct. 2012), 69-79
Sliding/Rolling phobic droplets along a fiber - measurement of interfacial forces	R. Mead-Hunter, T. Bergen, T. Becker, R. O’Leary, G. Kasper, B. Mullins	Langmuir, 2012, 28 (7), 3483-3488
Thin-film β-MoO3 Supported on α-Fe2O3 as a Shell–Core Catalyst for the Selective Oxidation of Methanol to Formaldehyde	G. Shi, T. Franzke, M.D. Sánchez, W. Xia, F. Weis, M. Seipenbusch, G. Kasper, M. Muhler	CHEMCATCHEM, 2012, 4 (6), 760–765
A numerical study of coagulation of nanoparticle aerosols injected continuously into a large, well stirred chamber	S. Anand, Y.S. Mayya, M. Yu, M. Seipenbusch, G. Kasper	Journal of Aerosol Science, 2012, Volume 52, October 2012, 18-32
Size resolved particle emission rates from an evolving indoor aerosol system	J. Koivisto, M. Yu, K. Hämeri, M. Seipenbusch	Journal of Aerosol Science, 2012, Volume 47, May 2012, 58-69

Begutachtete Veröffentlichungen 2011 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Charge dependent catalytic activity of gasborne nanoparticles	C. Peineke, P. Davoodi, M. Seipenbusch, A. Weber, A. Schmidt-Ott	Journal of Nanoscience Nanotechnology, 2011,11, 8628-8633.
Stabilization of supported Pd particles by the application of oxide coatings	A. Binder, M. Seipenbusch	Applied Catalysis A, 2011, 396, 1-7
Coke formation in steam reforming of natural gas over rhodium/alumina catalysts: An Atomic Force Microscopy Study using the oscillating friction mode	C. Eßmann, F. Weis, M. Seipenbusch, T. Schimmel, O. Deutschmann	Zeitschrift für Physikalische Chemie, 2011, 225 (11-12), 1207-1224
Monitoring method for carbon nanotubes (CNT): Personal sampler and corresponding reading device	M. Keller, G. Kreck, Y. Holzapfel, N. Neubauer, M. Seipenbusch	Kück, H.: 4M Association: 4M 2011, 8th International Conference on Multi-Material Micro Manufacture. Proceedings: 8-10 November 2011, Stuttgart, Germany. Singapore: Research Publishing, 2011 pp. 149-155 ISBN: 978-981-07-0319-6 (Buch) ISBN: 978-981-07-0320-2 (CD-ROM)
An Aerosol-Process for the Synthesis of Nanostructured Molybdenum Oxide Catalysts by Integrated Chemical Vapour Synthesis/Chemical Vapour Deposition at Atmospheric Pressure	F. Weis, K. Gao, M. Seipenbusch, G. Kasper	Journal of Nanoscience and Nanotechnology, 2011, 11 (9), 8313-8317(5)
In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung - A dialogue between aerosol science and biology	H.-R. Paur, R. R. Cassee, J. Teeguarden, H. Fissan, S. Diabate, M. Aufderheide, W. G. Kreyling, O. Hänninen, G. Kasper, M. Riediker, B. Rothen-Rutishauser, O. Schmid	Journal of Aerosol Science, 2011, 42, 668-692
Transfer functions and penetrations of five differential mobility analyzers for sub-2 nm particle classification	J. Jiang, M. Attoui, M. Heim, N. A. Brunelli, P. H. McMurry, G. Kasper, R. C. Flagan, K. Giapis, G. Mouret	Aerosol Science & Technology, 2011, 45, 480-492
Dimensional analysis of the cleaning pulse intensity in a surface filter test rig	J. Binnig, A. Bredin, J. Meyer, G. Kasper	Powder Technology, 2011, 211, 275-279
Observation of structure sensitive decomposition of Cp(allyl)Pd on Pd nanodots formed by MO-CVD	A. Binder, M. Seipenbusch, G. Kasper	Chemical Vapor Deposition, 2011, 17 (1-3), 54-57
The effect of water vapor on the particle structure and size of silica nanoparticles during sintering	V. Goertz, F. Weis, E. Keln, H. Nirschl, M. Seipenbusch	Aerosol Science & Technology, 2011, 45, 1287-1293
A highly sensitive technique for detecting catalytically active nanoparticles against a background of general workplace aerosols	N. Neubauer, F. Weis, A. Binder, M. Seipenbusch, G. Kasper	Journal of Physics: Conference Series, 2011, 304 (1), doi:10.1088/1742-6596/304/1/012011

Begutachtete Veröffentlichungen 2010 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Nanotechnologies, engineered nanomaterials and occupational health and safety - A review	K. Savolainen, L. Pylkkänen, H. Norppa, G. Falck, H. Lindberg, T. Tuomi, M. Vippola, H. Alenius, K. Hämeri, J. Koivisto, D. Brouwer, D. Mark, D. Bard, M. Berges, E. Jankowska, M. Posniak, P. Farmer, R. Singh, F. Krombach, P. Bihari, G. Kasper, M. Seipenbusch	Safety Sci., 2010, in press, DOI: 10.1016/j.ssci.2010.03.006
Charge dependent catalytic activity of gasborne nanoparticles	C. Peineke, P. Davoodi, M. Seipenbusch, A. Weber, A. Schmidt-Ott	J. Nanosc. Nanotechnol., accepted for publication 2010
Structure and density of deposits formed on filter fibers by inertial particle deposition and bounce	G. Kasper, S. Schollmeier, J. Meyer	Journal of Aerosol Science, 2010, 41, 1167-1182
Interparticle forces in silica nanoparticle agglomerates	M. Seipenbusch, S. Rothenbacher, M. Kirchhof, H.-J. Schmid, G. Kasper, A.P. Weber	J. Nanoparticle Reseaerch, 2010, 12, 2037-2044
Risk assessment of engineered nanomaterials and nanotechnologies - A review	K. Savolainen, H. Alenius, H. Norppa, L. Pylkkänen, T. Tuomi, G. Kasper	Toxicology, 2010, 269, 92-104
The efficiency of diffusional particle collection onto wire grids in the mobility equivalent size range of 1.2 to 8 nm	M. Heim, M. Attoui, G. Kasper	Journal of Aerosol Science, 2010, 41, 207-222
Sintering of Pd catalyst particles on SiO2-TiO2 carrier particles of different mixing ratios	A. Binder, M. Seipenbusch, G. Kasper	J. Phys. Chem. C, 2010, 114, 7816-7821

Begutachtete Veröffentlichungen 2009 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
The collection efficiency of a particle-loaded single filter fiber	G. Kasper, S. Schollmeier, J. Meyer, J. Hoferer	Journal of Aerosol Science, 2009, 40 (12), 993-1009
Reconstruction algorithms for the internal packing density distribution of fibrous filter media based on tomographic data	J. Hoferer, L. M. Hoffmann, J. Goebbels, G. Last, W. Weil, G. Kasper	Filtration, 2009, 9 (2), 147-154
The influence of cake residence time on the stable operation of a high-temperature gas filter	N. Döring, J. Meyer, G. Kasper	Chemical Engineering Science, 2009, 64/10, 2483-2490
Scalable numerical tools for the flow and pressure drop computation in fibrous filter media	F. Strauß, J. Hoferer, V. Heuveline, G. Kasper	Chemical Engineering & Technology, 2009, 32/2, 820-825
Structural stabilization of metal nanoparticles by chemical vapor deposition-applied silica coatings	M. Seipenbusch, A. Binder	J. Phys. Chem. C, 2009, 113, 20606-20610
Kinetics and particle size effects in ethene hydrogenation over supported palladium catalysts at atmospheric pressure	A. Binder, M. Seipenbusch, M. Muhler, G. Kasper	Journal of Catalysis, 2009, 268 (1), 150-155
Temperature dependence of the work function of free nanoparticle agglomerates	K. Reuter-Hack, G. Kasper, A.P. Weber	Applied Physics A, 2009, 95, 629-634
Automated phase correction via maximization of the real signal	E. Hardy, J. Hoferer, D. Mertens, G. Kasper	Magnetic Resonance Imaging, 2009, 27/3, 393-400
Origin and mechanisms of dust emission from pulse-jet cleaning filter media	J. Binnig, J. Meyer, G. Kasper	Powder Technology, 2009, 189/1, 108-114

Begutachtete Veröffentlichungen 2008 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Concentration and size measurements of fly ash particles from the clean gas side of a pressurised pulverised coal combustion test facility	J. Meyer, H. Umhauer, K. Reuter, A. Schiel, G. Kasper, M. Förster	Powder Technology, 2008, 180 (1-2), 57-63
Performance evaluation of 3 optical particle counters with an efficient "multimodal" calibration	M. Heim, B.J. Mullins, H. Umhauer, G. Kasper	Journal of Aerosol Science, 2008, 39/12, 1019-1031
Temporal evolution of nanoparticle aerosols in workplace exposure	M. Seipenbusch, A. Binder, G. Kasper	Ann. Occup. Hyg., 2008, Vol. 52, No. 8, 707-716
Fragmentation and bond strength of airborne diesel soot agglomerates	S. Rothenbacher, A. Messerer, G. Kasper	Particle and Fibre Toxicology, 2008, 5/9
A novel device for single particle light scattering size analysis and concentration measurement at high pressures and temperatures	H. Umhauer, J. Meyer, A. Schiel	Part. Part. Syst. Charact., 2008, 25, 119-135
Influence of the residual carbon content of biomass fly ashes on the filtration performance of ceramic surface filters at high temperature	D. Hoff, J. Meyer, G. Kasper	Powder Technology, 2008, 180, 172-177
Effect of filtration velocity variations on the NOx conversion of catalytically impregnated filter elements	Niklas Döring, Jörg Meyer, Gerhard Kasper	Powder Technology, 2008, 180, 203-209

Begutachtete Veröffentlichungen 2007 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Calibration on an optical particle counter to provide PM2.5 mass for well-defined particle materials	J. Binnig, J. Meyer, G. Kasper	Journal of Aerosol Science, 2007, 38, 325-332
Deposition of Palladium Nanodots of Controlled Size and Density onto Surface-Modified SiO2 Particles by an Atmospheric Pressure CVS/MOCVD Process	A. Binder, A. Heel, G. Kasper	Chemical Vapor Deposition, 2007, 13, 48-54
Unipolar field and diffusion charging in the transition regime - Part I: A 2-D limiting-sphere model	A. Marquard	Aerosol Science & Technology, 2007, 41, 597-610
Unipolar field and diffusion charging in the transition regime - Part II: Charging experiments	A. Marquard, J. Meyer, G. Kasper	Aerosol Science & Technology, 2007, 41, 611-623
Detachment of liquid droplets from fibres - Experimental and theoretical evaluation of detachment force due to interfacial tension effects	B.J. Mullins, A. Pfrang, R.D. Braddock, T. Schimmel, G. Kasper	Journal of Colloid and Interface Science, 2007, 312, 333-340
The mixing state of fine powders measured by magnetic resoncance imaging	E.H. Hardy, J. Hoferer, G. Kasper	Powder Technology, 2007, 177 (1), 12-22
Research note: Measuring particle deposition within fibrous filter media by magnetic resonance imaging	J. Hoferer, E. H. Hardy, J. Meyer, G. Kasper	Filtration, 2007, 7 (2), 154-158
The effect of the contact between platinum and soot particles on the catalytic oxidation of soot deposits on a diesel particle filter	K. Hinot, H. Burtscher, A.P. Weber, G. Kasper	Applied Catalysis B: Environmental, 2007, 71, 271-278
The synthesis of ZrO2/SiO2 nanocomposites by the two-step CVD of a volatile halogen-free Zr alkoxide in a fluidized-bed reactor	W. Xia, Y. Wang, V. Hagen, A. Heel, G. Kasper, U. Patil, A. Devi, M. Muhler	Chemical Vapor Deposition, 2007, 13, 37-41
Particulate emissions from filter-based gas cleaning devices and their characterization according to PM 2.5 criteria	G. Kasper, J. Binnig, J. Meyer	Filtration, 2007, 7 (1), 49-54
First LDA-measurements of nanoparticle velocities in a low pressure impacting jet	K. Reuter-Hack, A.P. Weber, S. Rösler, G. Kasper	Aerosol Science and Technology, 2007, 41, 277-283
Influence of the atmosphere on the thermal decomposition kinetics of the CaCO3 content of the PFBC coal flying ash	M.A. Gabal, D. Hoff, G. Kasper	Journal of Thermal Analysis and Calorimetry, 2007, 89/1, 109-116

Begutachtete Veröffentlichungen 2006 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Comment on: "Clogging of fibrous filters by liquid aerosol particles: Experimental and phenomenological modeling study" by Frising et al.	B.J. Mullins, G. Kasper	Chemical Engineering Sciences, 2006, 61/18, 6223-6227
Catalytic behaviour of nickel nanoparticles: gasborne vs. supported state	A.P. Weber, P. Davoodi, M. Seipenbusch, G. Kasper	Journal of Nanoparticle Research, 8/3-4 (2006), 445-453
Highly resolved determination of structure and particle deposition in fibrous filters by MRI	J. Hoferer, M.J. Lehmann, E.H. Hardy, J. Meyer, G. Kasper	Chemical Engineering & Technology 29/7 (2006) 816-819
Characterization of unipolar electrical aerosol chargers - Part I: A review of charger performance criteria	A. Marquard, J. Meyer and G. Kasper	Journal of Aerosol Science, 2006, 37/9, 1052-1068
Characterization of unipolar electrical aerosol charges - Part II: Application of comparison criteria to various types of nanoaerosol charging devices	A. Marquard, J. Meyer, G. Kasper	Journal of Aerosol Science 2006, 37,9, 1069-1080
Comment on: Penetration of Ultrafine Particles and Ion Clusters Through Wire Screens by Ichitsubo et al.	M. Heim, B.J. Mullins and G. Kasper	Aerosol Science and Technology, 2006, 40, 144-145
Particle deposition from aerosol flow inside a T-shaped micro-mixer	M. Heim, R. Wengeler, H. Nirschl and G. Kasper	Journal of Micromechanics and Microengineering, 2006, 16, 70-76

Begutachtete Veröffentlichungen 2005 - Gas-Partikel-Systeme
Titel	Autor	Quelle
Integration of cyclones and an optical particle counter into a filter tester VDI-3926/Type 1 to characterize PM2.5 emissions form pulse-jet cleaned filter media	J. Binnig, J. Meyer, G. Kasper	Gefahrstoffe Reinhaltung der Luft, 65/4 (2005), 163-168
Comparison of surface filter test rigs according to VDI 3926 and JIS Z 8909-1	J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka	Filtration, 5/4 (2005), 253-258
Production and characterization of Pd/SiO2 catalyst nanoparticles from a continuous MOCVS/MOCVD aerosol process at atmopheric pressure	A. Heel, G. Kasper	Aerosol Science and Technology, 39 (2005), 1027-1037
Electric fields coupled with ion space charge. Part I: Measurements	J. Meyer, A. Marquard, M. Poppner, R. Sonnenschein	Journal of Electrostatics 63 (2005), 775-780
Electric fields coupled with ion space charge. Part II: Computation	M. Poppner, R. Sonnenschein, J. Meyer	Journal of Electrostatics 83 (2005), 781-787
Nanoparticle charging efficiencies and related charging conditions in a wire-tube ESP at DC energization	A. Marquard, M. Kasper, J. Meyer and G. Kasper	Journal of Electrostatics, 2005, 63, 693-698
MRI as a key tool for understanding and modeling the filtration kinetics of fibrous media	M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper	Magnetic Resonance Imaging, 2005, 23 (2), Sp.Issue, 341-342
Fibrous Filters: Non-Invasive Determination of Local 3D Structure by MRI	M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper	Filtration, 2005, 5 (1), 62-67
Filtration Efficiency of Aerosol Particles Below 20 Nanometers	M. Heim, B. J. Mullins, M. Wild, J. Meyer and G. Kasper	Aerosol Science and Technology, 2005, 39, 782 - 789

Begutachtete Veröffentlichungen 2004 - Gas-Partikel-Systeme (GPS)
Titel	Autor	Quelle
Performance of a new commercial electrical mobility spectrometer	M. Heim, G. Kasper, G.P. Reischl and C. Gerhart	Aerosol Science and Technology, 2004, 38 S2, 3 - 14.