Titel | Autoren | Quelle |
---|---|---|
Filter movement during pressure pulse regeneration - A comparison of flat media and filter bags with regard to cleaning intensity and acceleration | S. Sobich, G. Kasper, J. Meyer |
FILTECH 2015 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 24.-26.02.2015, Abstracts G3 |
Time resolved measurements of pulse intensity, filter movement and regeneration during cleaning of baghouse filters | S. Sobich, G. Kasper, J. Meyer |
FILTECH 2016 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 11.-13.10.16, Abstracts G1 |
Baghouse filtration: a praxis-relevant media parameter to determine an emissions level of a pulse-jed cleanable filter | S. Sobich, G. Kasper, A. Dittler, J. Meyer |
FILTECH 2018 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 13.-15.03.18, Abstracts G9 |
Influence of filter operating parameters on fine dust emissions from pulse-cleand filter bags | O. Kurtz, J. Meyer, G. Kasper |
Chemical Engineering & Technology, 2016, 39, 3, 435-443 |
Influence of leaks on the overall emission behaviour of bag house filters | O. Kurtz, J. Meyer, G. Kasper |
FILTECH 2015 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 24.-26.02.2015, Abstracts G1 |
The contribution of small leaks in a baghouse filter to dust emission in the PM2.5 range—A system approach | O. Kurtz, J. Meyer, G. Kasper |
Particuology, 30, 2017, 40-52 |
Comparing the operating behavior of pulse cleaned filter bags with that of flat media in a VDI tester | O. Kurtz, G. Kasper, J. Meyer |
FILTECH 2011 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.3.2011, Proceedings, II-364 |
Conclusions on the operation behaviour of bag house filters by comparison of flat filter discs and filter bags | O. Kurtz, G. Kasper, J. Meyer |
WFC 11 - 11th World Filtration Congress, Graz, Austria, 16.-20.4.2012, Proceedings G07 |
Dust emission and operation performance of pulse cleaned needle felts in a pilot-size bag house filter for different operation parameters | O. Kurtz, G. Kasper, J. Meyer |
FILTECH 2013 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.10.2013, Abstract Book, 39 |
Influence of the clean gas volume on the transient differential pressure during jet pulse cleaning in a filter media testing rig | O. Kurtz, G. Kasper, J. Meyer |
FILTECH 2013 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.10.2013, Abstract Book, 15 |
Comparison of surface filter test rigs according to VDI 3926 and JIS Z 8909-1 | J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka |
Filtration, 5/4 (2005), 253-258 |
Comparison of surface filter test rigs VDI 3926 type 1 and JIS Z 8909-1 | J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka |
FILTECH 2005 International Conference & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 78-85 |
Calibration on an optical particle counter to provide PM2.5 mass for well-defined particle materials | J. Binnig, J. Meyer, G. Kasper |
Journal of Aerosol Science, 2007, 38, 325-332 |
Integration of cyclones and an optical particle counter into a filter tester VDI-3926/Type 1 to characterize PM2.5 emissions form pulse-jet cleaned filter media | J. Binnig, J. Meyer, G. Kasper |
Gefahrstoffe Reinhaltung der Luft, 65/4 (2005), 163-168 |
Origin and mechanisms of dust emission from pulse-jet cleaning filter media | J. Binnig, J. Meyer, G. Kasper |
Powder Technology, 2009, 189/1, 108-114 |
Influence of operating conditions and aging procedure on the emissions and operating performance of surface filters | J. Binnig, J. Meyer, G. Kasper |
FILTECH 2005 International Confernce & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 131-138 |
On the origin and the mechanisms of dust emission from pulse-jet cleaned filter media | J. Binnig, J. Meyer, G. Kasper |
FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technolgy, 02.27.-01.03.2007, Wiesbaden, Germany, Proceedings, II 27-33 |
Optical measurement of PM-relevant emissions | J. Binnig, J. Meyer, G. Kasper |
FILTECH 2005 International Conference & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 94-101 |
The influence of aging protocol on the filtration behaviour of cleanable filter media | J. Binnig, J. Meyer, G. Kasper |
FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technology, 27.02.-01.03.2007, Wiesbaden, Germany, Proceedings, II 336-343 |
The effect of filter tester geometry on cleaning pulse intensity | J. Binnig, A. Bredin, J. Meyer, G. Kasper |
FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technology, 27.02.-01.03.2007, Wiesbaden, Germany, Proceedings, II 58-65 |
Particulate emissions from filter-based gas cleaning devices and their characterization according to PM 2.5 criteria | G. Kasper, J. Binnig, J. Meyer |
Filtration, 2007, 7 (1), 49-54 |
![](/img/content/MVM_Kopfbild%20Institut_KIT_temp_klein_dark_210722.png)