KIT - Institute of Mechanical Process Engineering and Mechanics - Filterkonsortium at KIT

Europäisches Filterkonsortium: Publications as of 2019
Title	Authors	Source
Process integrated monitoring of spatially resolved particle emissions of a baghouse filter using a network of low-cost PM-sensors	P. Bächler, V. Löschner, J. Meyer, A. Dittler	Process Safety and Environmental Protection, 2022, 160, 411-423, https://doi.org/10.1016/j.psep.2022.02.005
Measurement of transient nanoparticle emissions of pulse-jet cleaned filters applying an engine exhaust particle sizer	P. Bächler, J. Meyer, A. Dittler	Aerosol Science and Technology, 2022, Vol. 56, No. 4, 394-402, https://doi.org/10.1080/02786826.2022.2027335
Impact of ambient air filters on PM concentration levels at an urban traffic hotspot (Stuttgart, Am Neckartor)	P. Bächler, T.K. Müller, T. Warth, T. Yildiz, A. Dittler	Atmospheric Pollution Research, 2021, 12, 101059, https://doi.org/10.1016/j.apr.2021.101059 (open access)
Simultaneous measurement of spatially resolved particle emissions in a pilot plant scale baghouse filter applying distributed low-cost particulate matter sensors	P. Bächler, J. Szabadi, J. Meyer, A. Dittler	Journal of Aerosol Science, 2020, 150, 105644, https://doi.org/10.1016/j.jaerosci.2020.105644 (open access)
Characterization of the emission behavior of pulse-jet cleaned filters using a low-cost particulate matter sensor	P. Bächler, J. Meyer, A. Dittler	Gefahrstoffe Reinhaltung der Luft 79, 2019, 79, Nr. 11-12, 443-450
Investigation of low-cost PM-sensors regarding the suitability for emission measurement for pulse-jet cleaned filters	P. Bächler, J. Meyer, A. Dittler	FILTECH 2019 - The Filtration Event, Cologne, Germany

Europäisches Filterkonsortium: Publications 2002 - 2018
Title	Authors	Source
Influence of filter operating parameters on fine dust emissions from pulse-cleand filter bags	O. Kurtz, J. Meyer, G. Kasper	Chemical Engineering & Technology, 2016, 39, 3, 435-443
Comparison of surface filter test rigs VDI 3926 type 1 and JIS Z 8909-1	J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka	FILTECH 2005 International Conference & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 78-85
Optical measurement of PM-relevant emissions	J. Binnig, J. Meyer, G. Kasper	FILTECH 2005 International Conference & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 94-101
Influence of operating conditions and aging procedure on the emissions and operating performance of surface filters	J. Binnig, J. Meyer, G. Kasper	FILTECH 2005 International Confernce & Exhibition for Filtration and Separation Technology, 11.-13.10.2005, Wiesbaden, Germany, Proceedings, II 131-138
On the origin and the mechanisms of dust emission from pulse-jet cleaned filter media	J. Binnig, J. Meyer, G. Kasper	FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technolgy, 02.27.-01.03.2007, Wiesbaden, Germany, Proceedings, II 27-33
The influence of aging protocol on the filtration behaviour of cleanable filter media	J. Binnig, J. Meyer, G. Kasper	FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technology, 27.02.-01.03.2007, Wiesbaden, Germany, Proceedings, II 336-343
The effect of filter tester geometry on cleaning pulse intensity	J. Binnig, A. Bredin, J. Meyer, G. Kasper	FILTECH 2007 International Conference & Exhibition for Filtration and Separation Technology, 27.02.-01.03.2007, Wiesbaden, Germany, Proceedings, II 58-65
Comparing the operating behavior of pulse cleaned filter bags with that of flat media in a VDI tester	O. Kurtz, G. Kasper, J. Meyer	FILTECH 2011 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.3.2011, Proceedings, II-364
Influence of the clean gas volume on the transient differential pressure during jet pulse cleaning in a filter media testing rig	O. Kurtz, G. Kasper, J. Meyer	FILTECH 2013 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.10.2013, Abstract Book, 15
Dust emission and operation performance of pulse cleaned needle felts in a pilot-size bag house filter for different operation parameters	O. Kurtz, G. Kasper, J. Meyer	FILTECH 2013 International Conference & Exhibition for Filtration and Separation Technology, Wiesbaden, 22.-24.10.2013, Abstract Book, 39
Influence of leaks on the overall emission behaviour of bag house filters	O. Kurtz, J. Meyer, G. Kasper	FILTECH 2015 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 24.-26.02.2015, Abstracts G1
Filter movement during pressure pulse regeneration - A comparison of flat media and filter bags with regard to cleaning intensity and acceleration	S. Sobich, G. Kasper, J. Meyer	FILTECH 2015 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 24.-26.02.2015, Abstracts G3
Time resolved measurements of pulse intensity, filter movement and regeneration during cleaning of baghouse filters	S. Sobich, G. Kasper, J. Meyer	FILTECH 2016 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 11.-13.10.16, Abstracts G1
Baghouse filtration: a praxis-relevant media parameter to determine an emissions level of a pulse-jed cleanable filter	S. Sobich, G. Kasper, A. Dittler, J. Meyer	FILTECH 2018 International Conference & Exhibition for Filtration and Separation Technology, Cologne, 13.-15.03.18, Abstracts G9
Particulate emissions from filter-based gas cleaning devices and their characterization according to PM 2.5 criteria	G. Kasper, J. Binnig, J. Meyer	Filtration, 2007, 7 (1), 49-54
Comparison of surface filter test rigs according to VDI 3926 and JIS Z 8909-1	J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka	Filtration, 5/4 (2005), 253-258
Integration of cyclones and an optical particle counter into a filter tester VDI-3926/Type 1 to characterize PM2.5 emissions form pulse-jet cleaned filter media	J. Binnig, J. Meyer, G. Kasper	Gefahrstoffe Reinhaltung der Luft, 65/4 (2006), 163-168
Calibration on an optical particle counter to provide PM2.5 mass for well-defined particle materials	J. Binnig, J. Meyer, G. Kasper	Journal of Aerosol Science, 2007, 38, 325-332
The contribution of small leaks in a baghouse filter to dust emission in the PM2.5 range—A system approach	O. Kurtz, J. Meyer, G. Kasper	Particuology, 30, 2017, 40-52
Origin and mechanisms of dust emission from pulse-jet cleaning filter media	J. Binnig, J. Meyer, G. Kasper	Powder Technology, 2009, 189/1, 108-114
Conclusions on the operation behaviour of bag house filters by comparison of flat filter discs and filter bags	O. Kurtz, G. Kasper, J. Meyer	WFC 11 - 11th World Filtration Congress, Graz, Austria, 16.-20.4.2012, Proceedings G07