| Validation of a new phenomenological “jump-and-channel” model for the wet pressure drop of oil mist filters |
D. Kampa, S. Wurster, J. Meyer, G. Kasper
|
Chemical Engineering Science, 2015, 122, 150-160
|
| Unipolar field and diffusion charging in the transition regime - Part II: Charging experiments |
A. Marquard, J. Meyer, G. Kasper |
Aerosol Science & Technology, 2007, 41, 611-623 |
| The influence of cake residence time on the stable operation of a high-temperature gas filter |
N. Döring, J. Meyer, G. Kasper |
Chemical Engineering Science, 2009, 64/10, 2483-2490 |
| The collection efficiency of a particle-loaded single filter fiber |
G. Kasper, S. Schollmeier, J. Meyer, J. Hoferer |
Journal of Aerosol Science, 2009, 40 (12), 993-1009 |
| Structure and density of deposits formed on filter fibers by inertial particle deposition and bounce |
G. Kasper, S. Schollmeier, J. Meyer |
Journal of Aerosol Science, 2010, 41, 1167-1182 |
| Spatially resolved online leak detection in a baghouse filter applying low-cost PM-sensors |
P. Bächler, J. Meyer, A. Dittler |
Chemie Ingenieur Technik, 2023, 95, No. 1-2, https://doi.org/10.1002/cite.202200116 (open access) |
| Simultaneous temporal, spatial and size-resolved measurements of aerosol particles in closed indoor environments applying mobile filters in various use-cases |
J. Szabadi, J. Meyer, M. Lehmann, A. Dittler |
Journal of Aerosol Science, 2022, 160, 105906, https://doi.org/10.1016/j.jaerosci.2021.105906 |
| Simultaneous measurement of spatially resolved particle emissions in a pilot plant scale baghouse filter applying distributed low-cost particulate matter sensors |
P. Bächler, J. Szabadi, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2020, 150, 105644, https://doi.org/10.1016/j.jaerosci.2020.105644 (open access) |
| Sampling and conditioning of engine blow-by aerosols for representative measurements by optical particle counter |
N. Nowak, K. Scheiber, J. Pfeil, J. Meyer, A. Dittler, T. Koch , G. Kasper |
Journal of Aerosol Science, October 2020, Volume 148, 105612, https://doi.org/10.1016/j.jaerosci.2020.105612 |
| Research note: Measuring particle deposition within fibrous filter media by magnetic resonance imaging |
J. Hoferer, E. H. Hardy, J. Meyer, G. Kasper |
Filtration, 2007, 7 (2), 154-158 |
| Relevance of downstream support structure design for oleophilic and oleophobic oil mist filter operating performance |
T. Penner, J. Meyer, A. Dittler |
Separation and Purification Technology, 2020, 248, 117074, https://doi.org/10.1016/j.seppur.2020.117074 |
| Process integrated monitoring of spatially resolved particle emissions of a baghouse filter using a network of low-cost PM-sensors |
P. Bächler, V. Löschner, J. Meyer, A. Dittler |
Process Safety and Environmental Protection, 2022, 160, 411-423, https://doi.org/10.1016/j.psep.2022.02.005 |
| Pressure drop and liquid transport through coalescence filter media used for oil mist filtration |
D. Kampa, S. Wurster, J. Buzengeiger, J. Meyer, G. Kasper
|
International Journal of Multiphase Flow, 2014, 58, 313-324
|
| Penetration of water-soluble material through gas-cleaning filters |
A.D. Schwarz, J. Meyer, A. Dittler |
Membranes 2022, 12, 776, https://doi.org/10.3390/membranes12080776 |
| Particulate matter detachment from a magnetizable single fiber applying magnetic forces in ambient air |
J. Szabadi, J. Meyer, A. Dittler |
Separations, 2023, 10, 297, https://doi.org/10.3390/separations10050297 (open access) |
| Particulate emissions from filter-based gas cleaning devices and their characterization according to PM 2.5 criteria |
G. Kasper, J. Binnig, J. Meyer |
Filtration, 2007, 7 (1), 49-54 |
| Origin and mechanisms of dust emission from pulse-jet cleaning filter media |
J. Binnig, J. Meyer, G. Kasper |
Powder Technology, 2009, 189/1, 108-114 |
| Opportunities for low-cost particulate matter sensors in filter emission measurements |
A.D. Schwarz, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2018, https://doi.org/10.1002/ceat.201800209 |
| Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 2: Modeling |
P. Bächler, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2024, 47, https://doi.org/10.1002/ceat.202300409 (open access) |
| Operating behavior of pulse jet-cleaned filters regarding energy demand and particle emissions - Part 1: Experimental parameter study |
P. Bächler, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2023, 46, https://doi.org/10.1002/ceat.202300080 (open access) |
| On the relationship of drop entrainment with bubble formation rates in oil mist filters |
S. Wurster, J. Meyer, G. Kasper |
Separation and Purification Technology, 2017, 179, 542-549 https://dx.doi.org/10.1016/j.seppur.2017.02.036 |
| On the Activity Enhancing Role of Iron Oxide for Noble Metal Oxidation Catalysts: A CVD-Based Study with Differently Structured Combinations of Pt and FeOx Coatings on Al2O3 |
L. Pasin, J. Meyer, E. Eiche, G. Kasper |
Coatings, 2018, 8, 217; DOI: 10.3390/coatings8060217 |
| On aerosol formation by condensation of oil vapor in the crankcase of combustion engines |
N. Nowak, T. Sinn, K. Scheiber, C. Straube, J. Pfeil, J. Meyer, T. Koch, G. Kasper, A. Dittler |
Aerosol Science and Technology, https://doi.org/10.1080/02786826.2021.1976720 |
| Oleophilic and oleophobic media combinations - Influence on oil mist filter operating performance |
T. Penner, J. Meyer, A. Dittler |
Separation and Purification Technology 2021, 261, 118255, https://doi.org/10.1016/j.seppur.2020.118255 |
| Numerical investigation of detachment and transport of particulate sturctures in wall-flow filters using lattice Boltzmann methods |
N. Hafen, J.R.D. Thieringer, J. Meyer, M.J. Krause, A. Dittler |
Journal of Fluid Mechanics, 2023, 956, A30, https://www.doi.org/10.1017/jfm.2023.35, (open access) |
| Nanoparticle charging efficiencies and related charging conditions in a wire-tube ESP at DC energization |
A. Marquard, M. Kasper, J. Meyer and G. Kasper |
Journal of Electrostatics, 2005, 63, 693-698 |
| Morphology of particulate structures on a fiber array before and at clogging point of an aerosol filtration process |
L. Poggemann, B. King, J. Meyer, A. Dittler |
Separations, 2023, 10, 462, https://doi.org/10.3390/separations10090462 |
| Morphology of particulate deposits formed on a single filter fibre by exposure to mixed aerosol flow |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler |
Journal of Aerosol Science, 2020, https://doi.org/10.1016/j.jaerosci.2020.105718 |
| Measurement of transient nanoparticle emissions of pulse-jet cleaned filters applying an engine exhaust particle sizer |
P. Bächler, J. Meyer, A. Dittler |
Aerosol Science and Technology, 2022, Vol. 56, No. 4, 394-402, https://doi.org/10.1080/02786826.2022.2027335 |
| Measurement of transient nanoparticle emissions of a municipal biomass incineration plant equipped with pulse-jet cleaned filters |
P. Bächler, J. Meyer, R. Ligotski, P. Krug, A. Dittler |
Process Safety and Environmental Protection, 2024, https://doi.org/10.1016/j.psep.2024.02.013 (open access) |
| Measurement of oil entrainment rates and drop size spectra from coalescence filter media |
S. Wurster, D. Kampa, J. Meyer, T. Müller, B.J. Mullins, G. Kasper
|
Chemical Engineering Science, 2015, 132, 72-80
|
| MRI as a key tool for understanding and modeling the filtration kinetics of fibrous media |
M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper |
Magnetic Resonance Imaging, 2005, 23 (2), Sp.Issue, 341-342 |
| Low Reynolds number drag and particle collision efficiency of a cylindrical fiber within a parallel array |
T. Müller, J. Meyer, G. Kasper
|
Journal of Aerosol Science, 2014, 77, 50-66
|
| Loss of nanoparticles in a particulate matter sampling system applied for environmental ultrafine particle measurements |
J. Zoller, J. Gulden, J. Meyer, A. Dittler |
Aerosol Science and Engineering, 2020, 4, 50-63, https://doi.org/10.1007/s41810-020-00054-6 (open access) |
| Investigation of the rearrangement of reactive-inert particulate structures in a single channel of a wall-flow filter |
J.R.D. Thieringer, N. Hafen, J. Meyer, M.J. Krause, A. Dittler |
Separations 2022, 9, 195, https://doi.org/10.3390/separations9080195 (open access) |
| Investigation of the potential of in-line particle concentration measurements in gas particle separation processes by using low-cost particulate matter sensors |
F. Reinke, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2024, 106476, https://doi.org/10.1016/j.jaerosci.2024.106476 (open acess) |
| Investigation of the local oil distribution on oleophilic mist filters applying X-ray micro-computed tomography |
C. Straube, J. Meyer, A. Dittler |
Separation and Purification Technology, 2023, 311, 123279, https://doi.org/10.1016/j.seppur.2023.123279 |
| Interaction of water droplets with soluble filter cakes in gas cleaning applications |
A.D. Schwarz, J. Meyer, A. Dittler |
Separation and Purification Technology, 2021, https://doi.org/10.1016/j.seppur.2020.118128 |
| Integration of cyclones and an optical particle counter into a filter tester VDI-3926/Type 1 to characterize PM2.5 emissions form pulse-jet cleaned filter media |
J. Binnig, J. Meyer, G. Kasper |
Gefahrstoffe Reinhaltung der Luft, 65/4 (2006), 163-168 |
| Influence of the residual carbon content of biomass fly ashes on the filtration performance of ceramic surface filters at high temperature |
D. Hoff, J. Meyer, G. Kasper |
Powder Technology, 2008, 180, 172-177 |
| Influence of filter operating parameters on fine dust emissions from pulse-cleaned filter bags |
O. Kurtz, J. Meyer, G. Kasper |
Chemical Engineering Technology, 2016, 39, No.3, 435-443 |
| Influence of deposited liquid structures on the separation efficiency of thin oleophilic fiber layers of mist filters |
C. Straube, R. Mandic, J. Meyer, A. Dittler |
Separation and Purification Technology, 2023, 125977, https://doi.org/10.1016/j.seppur.2023.125977 |
| Influence of 3D printed downstream support structures on pressure drop and entrainment of oleophilic and oleophobic oil mist filters |
C. Straube, G. Yang, D. Voll, J. Meyer, P. Théato, A. Dittler |
Separation and Purification Technology, 2022, 290, 120802, https://doi.org/10.1016/j.seppur.2022.120802 |
| In situ tracking of break-up, resuspension, and transport of reactive particle structures in a single wall-flow filter channel |
J.R.D. Thieringer, H. Werling, J. Meyer, A. Dittler |
Emission Control Science and Technology, 2023, https://doi.org/10.1007/s40825-023-00228-x (open access) |
| In situ characterization of particle structures generated at different flow velocities on a single fiber in the gas phase |
J. Szabadi, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2023, 106197, https://doi.org/10.1016/j.jaerosci.2023.106197 |
| Impact of water droplet and humidity interaction with soluble particles on the operational performance of surface filters in gas cleaning applications |
A.D. Schwarz, L. König, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2020, 142, 105523, https://doi.org/10.1016/j.jaerosci.2020.105523 (open access) |
| Impact of residential real-world wood stove operation on air quality concerning PM2.5 immission |
J.R.D. Thieringer, J. Szabadi, J. Meyer, A. Dittler |
Processes 2022, 10, 545, https://doi.org/10.3390/pr10030545 (open access) |
| Impact of operating conditions on the evolution of droplet penetration in oil mist filters |
T. Penner, J. Meyer, G. Kasper, A. Dittler |
Separation and Purification Technology, 2018, https://doi.org/10.1016/j.seppur.2018.10.037 |
| Impact of an oil coating on particle deposition and dust holding capacity of fibrous filters |
T.K. Müller, J. Meyer, E. Thébault, G. Kasper |
Powder Technology, 2014, 253, 247-255 |
| Identification of deposited oil structures on thin porous oil mist filter media applying μ-CT imaging technique |
C. Straube, J. Meyer, A. Dittler |
Separations 2021, 8, 193, https://doi.org/10.3390/separations8100193 (open access) |
| Humidity considerations in filter testing based on analysis of filters from gas turbine applications |
A.D. Schwarz, J. Dutzi, P. Weber, C. Sattler, K. Schulz, T. Caesar, J. Meyer, A. Dittler |
Chemical Engineering & Technology, 2022, https://doi.org/10.1002/ceat.202100344 (open access) |
| Highly resolved determination of structure and particle deposition in fibrous filters by MRI |
J. Hoferer, M.J. Lehmann, E.H. Hardy, J. Meyer, G. Kasper |
Chemical Engineering & Technology 29/7 (2006) 816-819 |
| Generation of ash particles from different lube oil mists |
J.R.D. Thieringer, A. K. Watzek, J. Meyer, A. Dittler |
Aerosol Science & Technology, 2022, Vol, 56, No. 8, 744-756, https://doi.org/10.1080/02786826.2022.2073192 (open access) |
| Flow velocity dependence of the pressure drop of oil mist filters |
H.E. Kolb, J. Meyer, G. Kasper |
Chemical Engineering Science, 2017, 166, 107-114, https://dx.doi.org/10.1016/j.ces.2017.03.028 |
| Filtration Efficiency of Aerosol Particles Below 20 Nanometers |
M. Heim, B. J. Mullins, M. Wild, J. Meyer and G. Kasper |
Aerosol Science and Technology, 2005, 39, 782 - 789 |
| Fibrous Filters: Non-Invasive Determination of Local 3D Structure by MRI |
M.J. Lehmann, E.H. Hardy, J. Meyer and G. Kasper |
Filtration, 2005, 5 (1), 62-67 |
| Experimental investigations of the detachment of different particle structures from a magnetizable fiber in the gas phase |
J. Szabadi-Fuchs, J. Meyer, A. Dittler |
Separations, 2023, 10, 579, https://doi.org/10.3390/separations10120579 (open access) |
| Experimental investigation on the change of pull-off force between bulk particulate material and an elastic polymeric filter fiber |
L. Poggemann, R. Thelen, J. Meyer, A. Dittler |
Journal of Collid and Interface Science, 2023, 641, 903-915, https://doi.org/10.1016/j.jcis.2023.03.051 |
| Experimental investigation of reactive-inert particulate matter detachment from metal fibres at low flow velocities and different gas temperatures |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, U. Janoske, A. Dittler |
Aerosol Science and Engineering, 2020, https://doi.org/10.1007/s41810-020-00081-3 (open access) |
| Experimental detection of particle structures detachment from a strectchable single fiber during multiple consecutive stretching cycles |
L. Poggemann, J. Meyer, A. Dittler |
Separations 2022, 9, 168, https://doi.org/10.3390/separations9070168 (open access) |
| Experimental and numerical investigation of droplet–fiber interaction on mechanically excited fiber |
A. Schwarzwälder, F. Freese, J. Meyer, K, Loganathan, H. Tietze, A. Dittler, U. Janoske |
Physics of Fluids 2024, 36, 032006, https://doi.org/10.1063/5.0188784 |
| Experimental analysis of water-droplet-fiber interaction on a mechanically excited hydrophobic fiber |
A. Schwarzwälder, J. Meyer, A. Dittler |
Physics of Fluids, 2024, 36, 012010, https://doi.org/10.1063/5.0178183 |
| Experimental analysis of droplet coalescence and transport mechanisms on a single vertical fiber |
A. Schwarzwälder, J. Meyer, A. Dittler |
Experiments in Fluids, 2023, 64, 103, https://doi.org/10.1007/s00348-023-03628-5 (open access) |
| Electric fields coupled with ion space charge. Part II: Computation |
M. Poppner, R. Sonnenschein, J. Meyer |
Journal of Electrostatics 83 (2005), 781-787 |
| Electric fields coupled with ion space charge. Part 1: Measurements |
J. Meyer, A. Marquard, M. Poppner, R. Sonnenschein |
Journal of Electrostatics 63 (2005), 775-780 |
| Einfluss ausgewählter Medienstrukturparameter auf das Betriebsverhalten von Öllnebelfiltern |
T. Penner, W. Heikamp, J. Meyer, A. Dittler |
Chemie Ingenieur Technik, 2019, 91, No. 11, 1615-1622, DOI: 10.1002/cite.201900018 |
| Efficient aerosol assisted delivery of low-volatility precursor for CVD applications |
L. Pasin, J. Meyer, E. Eiche, F. Weis, G. Kasper |
Journal of Aerosol Science, 2018, 126, 180-190, https://doi.org/10.1016/j.jaerosci.2018.09.003 |
| Effect of filtration velocity variations on the NOx conversion of catalytically impregnated filter elements |
Niklas Döring, Jörg Meyer, Gerhard Kasper |
Powder Technology, 2008, 180, 203-209 |
| Drainage behavior and entrainment mechanisms in oil mist separation applications—A review |
R. Mandic, J. Meyer, A. Dittler |
Separation and Purification Technology, 2024, 130274, https://doi.org/10.1016/j.seppur.2024.130274 (open access) |
| Dimensional analysis of the cleaning pulse intensity in a surface filter test rig |
J. Binnig, A. Bredin, J. Meyer, G. Kasper |
Powder Technology, 2011, 211, 275-279 |
| Detachment of particulate structures from a fiber array due to stretching and simultaneous gas flow |
L. Poggemann, P. Längle, J. Meyer, A. Dittler |
Separation and Purification Technology, 2024, 127887, https://doi.org/10.1016/j.seppur.2024.127887 (open access) |
| Defined polymer shells on nanoparticles via a continuous aerosol-based process |
S. Sigmund, E. Akgün, J. Meyer, J. Hubbuch, M. Wörner, G. Kasper
|
Journal of Nanoparticle Research, 2014, DOI: 10.1007/s11051-014-2533-9
|
| Concentration and size measurements of fly ash particles from the clean gas side of a pressurised pulverised coal combustion test facility |
J. Meyer, H. Umhauer, K. Reuter, A. Schiel, G. Kasper, M. Förster |
Powder Technology, 2008, 180 (1-2), 57-63 |
| Comparison of surface filter test rigs according to VDI 3926 and JIS Z 8909-1 |
J. Binnig, N. Mao, J. Meyer, M. Hata, G. Kasper, C. Kanaoka |
Filtration, 5/4 (2005), 253-258 |
| Comparison of different particle measurement techniques at a heavy-duty diesel engine test bed |
T. Michler, J Dörnhöfer, D. Erforth, A. Heinz, K. Scheiber, P. Weber, N. Nowak, H. Kubach, J. Meyer, T. Koch, A. Dittler |
SAE Technical Paper 2019-24-0158, 2019, doi: 10.4271/2019-24-0158 |
| Characterization of unipolar electrical aerosol charges - Part II: Application of comparison criteria to various types of nanoaerosol charging devices |
A. Marquard, J. Meyer, G. Kasper |
Journal of Aerosol Science 37/9, 1069-1080 |
| Characterization of unipolar electrical aerosol chargers—Part I: A review of charger performance criteria |
A. Marquard, J. Meyer and G. Kasper |
Journal of Aerosol Science, 37, 2006, 1052-1068 |
| Characterization of mesoscale inhomogeneity in nonwovens and its relevance in the filtration of fine mists |
T. Penner, J. Meyer, A. Dittler |
Journal of Aerosol Science, January 2021, volume 151, 105674, https://doi.org/10.1016/j.jaerosci.2020.105674 (open access) |
| Calibration on an optical particle counter to provide PM2.5 mass for well-defined particle materials |
J. Binnig, J. Meyer, G. Kasper |
Journal of Aerosol Science, 2007, 38, 325-332 |
| Bubbling vs. blow-off - On the relevant mechanism(s) of drop entrainment from oil mist filter media |
S. Wurster, J. Meyer, E.H. Kolb, G. Kasper
|
Separation and Purification Technology, 2015, 152, 70-79
|
| Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration – Teil 2: Experimentelle Untersuchungen |
A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt |
Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100213 (open access) |
| Auswirkungen eines erhöhten Wassergehalts auf lösliche Staubkuchenbestandteile in der Oberflächenfiltration - Teil 1: Theoretische Betrachtungen |
A.D. Schwarz, D. Horst, J. Meyer, Q. Zhang, A. Dittler, E. Schmidt |
Chemie Ingenieur Technik, 2022, 94, No.8, https://doi.org/10.1002/cite.202100158 (open access) |
| An electrical conductivity based method of determining the particle deposition rate in air-liquid interface devices |
H. Wiegand, J. Meyer, G. Kasper
|
Toxicology in Vitro, 2015, 29 (5), 1100-1106
|
| An aerosol-based process for electrostatic coating of particle surfaces with nanoparticles |
S. Sigmund, M. Yu, J. Meyer, G. Kasper |
Aerosol Science and Technology, 2014, 48, 142-149 |
| A sustainable route for antibacterial nanofinishing of textiles |
E. Hontañon, J. Meyer, M. Blanes, V. Cambra, X. Guo, M. Masuhr, A. Muntean, L. Santos, H. Nirschl, E. Kruis |
International Journal of Theoretical and Applied Nanotechnologie, 2016, 4, DOI: 10.11159/ijtan.2016.003 |
| A novel method to investigate detachment of particulate structures from an elastic single fiber at low gas flow velocities |
L. Poggemann, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2021, 156, 105785, https://doi.org/10.1016/j.jaerosci.2021.105785 (open access) |
| A novel device for single particle light scattering size analysis and concentration measurement at high pressures and temperatures |
H. Umhauer, J. Meyer, A. Schiel |
Part. Part. Syst. Charact., 2008, 25, 119-135 |
| A novel apparatus for simultaneous Laser-light-sheet optical particle counting and video recording in the same measurement chamber at high temperature |
J. Zoller, A. Zargaran, K. Braschke, J. Meyer, Uwe Janoske, A. Dittler |
Sensors, 2022, 22, 1363, https://doi.org/10.3390/s22041363 (open access) |
| A newly developed dilution system for optical particle size and concentration measurements in oil-injected scres compressors |
J.C. Deichmann, C. Straube, J. Eisengräber-Pabst, T. Grein, J. Meyer, A. Dittler |
Aerosol Science and Technology, 2023, https://doi.org/10.1080/02786826.2023.2209623 |
| A mesoscale model for the relationship between efficiency and internal liquid distribution of droplet mist filters |
H.E. Kolb, A.K. Watzek, V. Zaghini Francesconi, J. Meyer, A. Dittler, G. Kasper |
Journal of Aerosol Science, 2018, 123, 219-230, https://doi.org/10.1016/j.jaerosci.2018.05.013 |
| A fast and accurate method of using electrical mobility scans for the direct measurement of aerosol charge distributions |
M. Wild, J. Meyer, G. Kasper |
Journal of Aerosol Science, 2012, 52 (Oct. 2012), 69-79 |
| A critical note on filtering-face-piece filtration efficiency determination applying EN 149 |
J. Zoller, J. Meyer, A. Dittler |
Journal of Aerosol Science, 2021, 158, 105830, https://doi.org/10.1016/j.jaerosci.2021.105830 |
